Home › Fault codes › P060500
P060500 — Control unit - function restriction
Control unit - function restriction. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set P060500
How to read and clear P060500
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and P060500 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the DC/DC Converter
| C145821 | Control unit – function restriction |
| C145822 | Control unit – function restriction |
| C1458F0 | Control unit – Function limitation |
| C145A01 | Terminal 30 – defective |
| P060200 | Programming |
| P060400 | Control unit - function restriction |
| P062F00 | Function restriction |
| P064F00 | Coding |
| P068500 | Main relay, control line - open circuit |
| P068B00 | ECM/PCM Power Relay De-Energized Performance - Too Late |
| P0A0E00 | High-voltage system, pilot line – open circuit |
| P0A9400 | Function limitation |
All 200 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.