Home › Fault codes › P060200

P060200 — Programming

Programming. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set P060200

Porsche Taycan

Brake ElectronicsDC/DC ConverterDrive Motor Control Module

Porsche 911 (992)

Battery Energy Control ModuleBrake ElectronicsDrive Motor Control ModulePDK Transmission

Porsche Panamera (971, 2017–2023)

Brake ElectronicsEBKV (Bremskraftverstaerker)Drive Motor Control ModuleEngine Control Module 1PDK Transmission

Porsche Panamera (972, 2024–)

Battery Energy Control ModuleBrake ElectronicsDrive Motor Control ModulePDK Transmission

Porsche Cayenne (9YA)

Battery Energy Control ModuleBrake ElectronicsEBKV (Bremskraftverstaerker)Drive Motor Control Module

How to read and clear P060200

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and P060200 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Brake Electronics

P056200Supply voltage - voltage too low
P056300Supply voltage too high
P057100Brake light switch - signal implausible
P05DC00Brake pedal travel sensor 2 - implausible signal
P05FF00Brake pressure sensor / brake pedal travel sensor - deviation
P060100Function restriction
P060400Control unit - function restriction
P060600Control unit defective
P060700Ctrl. module faulty
P060B00Control unit – internal error
P061000Control unit - variant coding invalid
P062F00Function restriction

All 317 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.