Home › Fault codes › P0A0E00
P0A0E00 — High-voltage system, pilot line – open circuit
High-voltage system, pilot line – open circuit. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set P0A0E00
How to read and clear P0A0E00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and P0A0E00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the DC/DC Converter 2
| B1A7F00 | Active discharging |
| B200000 | Control unit – function restriction |
| B200087 | Control module, Software incompatible |
| B2F0100 | Development code 1 |
| C102E00 | Switch-off due to excessive temperature |
| C114C00 | Calibration |
| P178E00 | Compressor for level control, Temperature too high |
| P1A2C00 | Control unit - function restriction |
| P31F000 | Switch-off due to coolant overtemperature |
| P32A800 | HV voltage converter - function limitation due to undervoltage (12 V) |
| P32AD00 | HV voltage converter - function limitation due to undervoltage (12 V) |
| P32B200 | High-voltage voltage converter, voltage sensor, below minimum |
All 34 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.