Home › Fault codes › B201800
B201800 — Authentication of a function, failed
Authentication of a function, failed. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B201800
How to read and clear B201800
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B201800 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Aerodynamics Control Unit
| B1C67F0 | Front spoiler, performance position – pressure too low |
| B1C67F1 | Front spoiler, performance position – pressure too high |
| B200000 | Control unit – function restriction |
| B200100 | Control unit – wrong software version |
| B200500 | Coding |
| B201200 | Coding |
| B201C00 | Supply voltage, Implausible signal |
| B2F0100 | Development code 1 |
| B2F0200 | Development code 2 |
| B2F0300 | Development code 3 |
| B2F0400 | Development code 4 |
| B2F0500 | Development code 5 |
All 305 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.