BedienSG_hi (Bedieneinheit hinten): fault codes
All 43 fault codes of the Porsche Panamera (971, 2017–2023) BedienSG_hi (Bedieneinheit hinten) with the manufacturer's names. How to read and clear them with STEUER14.
| Code | Fault |
|---|---|
| B147004 | Control unit – function restriction |
| B147016 | Supply voltage – too low |
| B147017 | Supply voltage – too high |
| B1470F3 | Temperature - above limit value |
| B1470F4 | Temperature - below limit value |
| B156B04 | Front A/C display control head, Faulty |
| B156B16 | Front A/C display control head, Voltage too low |
| B184C00 | Release active |
| B1A37F0 | Graphics unit, Data loss in memory |
| B1A37F1 | Graphics unit, Voltage supply faulty |
| B1A37F2 | Graphics unit, Connection to display interrupted |
| B200000 | Control unit – function restriction |
| B200100 | Control unit – wrong software version |
| B200500 | Coding |
| B2008F0 | Function restriction, temperature – above limit value |
| B201200 | Coding |
| B201800 | Authentication of a function, failed |
| B220000 | Graphics unit faulty |
| B220100 | Graphics unit defective |
| B220110 | Graphics unit defective |
| B220200 | Graphics unit faulty |
| B220210 | Graphics unit faulty |
| B220300 | Graphics unit faulty |
| B220310 | Touch controller - signal implausible |
| B220400 | Touch controller - malfunction |
| B220410 | Touch controller - reset |
| B220500 | Touch controller - timeout |
| B220510 | Touch controller - restart after fault |
| C10A700 | Rolling test mode active |
| C10EE00 | Rolling test mode - fault |
| C114C00 | Calibration |
| P061000 | Control unit - variant coding invalid |
| U001000 | Comfort CAN bus – defective |
| U110000 | Component protection – not taught |
| U110100 | Component protection active |
| U110300 | Production mode active |
| U110E00 | Coding |
| U111000 | Function restriction due to missing message |
| U111100 | Operating and display log - missing message |
| U112100 | Data bus - missing message |
| U113200 | Data bus - fault value received |
| U140000 | Function restriction – supply voltage too low |
| U140100 | Function restriction – supply voltage too high |
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.