BedienSG_vo (Bedieneinheit vorne): fault codes
All 44 fault codes of the Porsche Cayenne (9YA) BedienSG_vo (Bedieneinheit vorne) with the manufacturer's names. How to read and clear them with STEUER14.
| Code | Fault |
|---|---|
| B147004 | Control unit – function restriction |
| B147016 | Supply voltage – too low |
| B147017 | Supply voltage – too high |
| B1470F3 | Temperature - above limit value |
| B1470F4 | Temperature - below limit value |
| B151704 | Control unit for chassis control (in instrument cluster) – faulty |
| B151729 | Control unit for chassis control (in instrument cluster) – signal implausible |
| B151804 | Control unit for chassis control (in instrument cluster) – faulty |
| B151829 | Control unit for chassis control (in instrument cluster) – signal implausible |
| B156B04 | Front A/C display control head, Faulty |
| B156B16 | Front A/C display control head, Voltage too low |
| B184C00 | Release active |
| B194F04 | Rear air-conditioning system regulator – defective |
| B194FF0 | Rear air-conditioning system regulator – no communication |
| B194FF1 | Rear air conditioning system regulator – message implausible |
| B200000 | Control unit – function restriction |
| B200100 | Control unit – wrong software version |
| B200500 | Coding |
| B2008F0 | Function restriction, temperature – above limit value |
| B201200 | Coding |
| B201500 | Production mode active |
| B201800 | Authentication of a function, failed |
| C10A700 | Rolling test mode active |
| C10EE00 | Rolling test mode - fault |
| C114C00 | Calibration |
| P061000 | Control unit - variant coding invalid |
| U001000 | Comfort CAN bus – defective |
| U001100 | Comfort CAN bus - no communication |
| U103000 | LIN bus 1 – electrical fault |
| U10B800 | Local data bus, Faulty |
| U10BA00 | LIN bus 1 – no communication |
| U110000 | Component protection – not taught |
| U110100 | Component protection active |
| U110300 | Production mode active |
| U110E00 | Coding |
| U111000 | Function restriction due to missing message |
| U111100 | Operating and display log - missing message |
| U112100 | Data bus - missing message |
| U112200 | Data bus - implausible message |
| U113200 | Data bus - fault value received |
| U116000 | Control unit for chassis control (in instrument cluster) – no communication |
| U11BA00 | Control head for driving and comfort functions, No communication |
| U140000 | Function restriction – supply voltage too low |
| U140100 | Function restriction – supply voltage too high |
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.