VTS (Diebstahlverfolgungssystem): fault codes
All 25 fault codes of the Porsche 911 (992) VTS (Diebstahlverfolgungssystem) with the manufacturer's names. How to read and clear them with STEUER14.
| Code | Fault |
|---|---|
| B17DF52 | PVTS, not activated |
| B17DFF0 | PVTS, driver cards not taught |
| B17DFF1 | PVTS, special mode active |
| B17DFF2 | PVTS, anti-theft mode active |
| B17DFF3 | PVTS, restart inhibit active |
| B17DFF4 | PVTS, self-test failed |
| B200000 | Control unit – function restriction |
| B200100 | Control unit – wrong software version |
| B200500 | Coding |
| B2008F0 | Function restriction, temperature – above limit value |
| B2009F0 | Function restriction, temperature - below limit value |
| B201200 | Coding |
| B201800 | Authentication of a function, failed |
| C10A700 | Rolling test mode active |
| C10EE00 | Rolling test mode - fault |
| C114C00 | Calibration |
| U001100 | Comfort CAN bus - no communication |
| U110000 | Component protection – not taught |
| U110100 | Component protection active |
| U110E00 | Coding |
| U111100 | Operating and display log - missing message |
| U112100 | Data bus - missing message |
| U112300 | Data bus – fault value received |
| U140000 | Function restriction – supply voltage too low |
| U140100 | Function restriction – supply voltage too high |
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.