Home › Fault codes › U13CF00
U13CF00 — PVTS, developer mode active
PVTS, developer mode active. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U13CF00
How to read and clear U13CF00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U13CF00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Telematics Communication Unit
| U112100 | Data bus - missing message |
| U112300 | Data bus – fault value received |
| U11C400 | Ethernet databus, No communication |
| U120000 | Data bus, Faulty |
| U120100 | Data bus, No communication |
| U12D000 | IPv6 address conflict |
| U13D600 | PVTS, restart inhibit active at customerʼs request |
| U13EB00 | Emergency call module and communication unit, Flight mode activated |
| U140500 | Terminal 15 signal line – signal implausible |
| U142B00 | Ethernet databus, Open circuit |
| U143400 | Ethernet databus, Short circuit |
| U144B00 | Flight mode not active due to actuator |
All 157 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.