Home › Fault codes › U140500
U140500 — Terminal 15 signal line – signal implausible
Terminal 15 signal line – signal implausible. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U140500
Porsche Cayenne (9YA)
SC (Airbag)All-Wheel Drive ControlAEM – Active Engine MountsBrake ElectronicsEBKV (Bremskraftverstaerker)BCM1 (Body Control Module 1)Chassis ControlMRR_VR (Radar VR)MRR_VL (Radar VL)GatewayLCM_L (Lichtsteuerung links)LCM_R (Lichtsteuerung rechts)Night Vision AssistSteering AssistELV – Electric Steering LockTelematics Communication UnitAAG (Anhaenger)Torque Converter (Transmission)
How to read and clear U140500
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U140500 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Airbag
| U111A00 | Private CAN data bus - faulty |
| U112100 | Data bus - missing message |
| U112200 | Data bus - implausible message |
| U112300 | Data bus – fault value received |
| U129A00 | Reversible belt tensioner, rear left - no communication |
| U129C00 | Reversible belt tensioner, rear right - no communication |
All 723 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.