Home › Fault codes › U13EB00
U13EB00 — Emergency call module and communication unit, Flight mode activated
Emergency call module and communication unit, Flight mode activated. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U13EB00
How to read and clear U13EB00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U13EB00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Telematics Communication Unit
| U11C400 | Ethernet databus, No communication |
| U120000 | Data bus, Faulty |
| U120100 | Data bus, No communication |
| U12D000 | IPv6 address conflict |
| U13CF00 | PVTS, developer mode active |
| U13D600 | PVTS, restart inhibit active at customerʼs request |
| U140500 | Terminal 15 signal line – signal implausible |
| U142B00 | Ethernet databus, Open circuit |
| U143400 | Ethernet databus, Short circuit |
| U144B00 | Flight mode not active due to actuator |
| U144F00 | Emergency call button, no communication |
| U153E00 | Emergency call module and communication unit, Recognition in mobile communications network not possible |
All 157 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.