Home › Fault codes › U148100
U148100 — Charging module for contactless high-voltage charging (AWC) - implausible signal
Charging module for contactless high-voltage charging (AWC) - implausible signal. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U148100
How to read and clear U148100
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U148100 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Thermal Management
| U112300 | Data bus – fault value received |
| U11DC00 | Charging module, contactless high-voltage charging (AWC) - missing message |
| U12B900 | Control unit for driver assistance systems – missing message |
| U140000 | Function restriction – supply voltage too low |
| U140100 | Function restriction – supply voltage too high |
| U140B00 | Energy management active |
| U14C100 | Directional-control valve for high-temperature circuit (WMV1) – no communication |
| U300000 | Relay for thermal management components (SR6.2) – short circuit to ground |
| U300100 | Control unit – run-on fault |
| U366700 | LIN bus 2 - electrical fault |
All 636 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.