Home › Fault codes › U140B00
U140B00 — Energy management active
Energy management active. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U140B00
How to read and clear U140B00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U140B00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Gateway
| U13C300 | Control unit for rear-axle steering 2 - no communication |
| U13EA00 | High-voltage system, locked |
| U13FD00 | 48-volt system, locked |
| U13FE00 | Inverter for electrical outlet, Locking after crash active |
| U140500 | Terminal 15 signal line – signal implausible |
| U140600 | Closed-circuit current too high |
| U141100 | Battery terminal recognition, Open circuit |
| U141D00 | Right exterior rear view mirror, no communication |
| U141E00 | Left exterior rear view mirror, no communication |
| U141F00 | Control unit for hood ornament, no communication |
| U142100 | Connect control unit - no communication |
| U142200 | Data bus communication unit, Single wire mode |
All 374 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.