Home › Fault codes › U142000
U142000 — Vehicle electrical system control module, Signal not initialized
Vehicle electrical system control module, Signal not initialized. The Taycan, 911 (992), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U142000
How to read and clear U142000
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U142000 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Front Assist Camera
| U11C400 | Ethernet databus, No communication |
| U133B00 | Drivetrain control, Implausible signal |
| U13E300 | CONCLUSION Identification, implausible |
| U13EE00 | Airbag control module timestamp, implausible |
| U140000 | Function restriction – supply voltage too low |
| U140100 | Function restriction – supply voltage too high |
| U142B00 | Ethernet databus, Open circuit |
| U143400 | Ethernet databus, Short circuit |
| U143D00 | FlexRay data bus, limited |
| U146800 | Laser for adaptive cruise control, implausible signal |
| U146900 | Lane change assistance control module 2, implausible signal |
| U146A00 | Control module for left front object detection radar sensor, implausible signal |
All 336 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.