Home › Fault codes › U13EE00
U13EE00 — Airbag control module timestamp, implausible
Airbag control module timestamp, implausible. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U13EE00
How to read and clear U13EE00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U13EE00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Adaptive Cruise Control
| U111200 | Data bus - implausible message |
| U111400 | Component protection – authentication failed (GFA) |
| U111C00 | Presentation mode active |
| U112100 | Data bus - missing message |
| U112200 | Data bus - implausible message |
| U112300 | Data bus – fault value received |
| U140000 | Function restriction – supply voltage too low |
| U140100 | Function restriction – supply voltage too high |
| U14B900 | Left rear door control module, Signal not qualified |
| U14BA00 | Left rear door control module, Signal not initialized |
| U14BB00 | Front passenger door control module, Signal not qualified |
| U14BC00 | Front passenger door control module, Signal not initialized |
All 53 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.