Home › Fault codes › U112200

U112200 — Data bus - implausible message

Data bus - implausible message. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set U112200

Porsche Taycan

Porsche 911 (992)

Porsche Panamera (971, 2017–2023)

Porsche Panamera (972, 2024–)

Porsche Cayenne (9YA)

How to read and clear U112200

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and U112200 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Exterior Sound Actuator

P1EEC00Loudspeaker test active
U101100Supply voltage – too low
U101200Supply voltage – too high
U10D900Control unit not installed correctly
U110300Production mode active
U112100Data bus - missing message
U112300Data bus – fault value received
U120000Data bus, Faulty
U120100Data bus, No communication
U140000Function restriction – supply voltage too low
U140100Function restriction – supply voltage too high
U18C800Data bus, Faulty

All 50 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.