Home › Fault codes › U042B00
U042B00 — Control unit for chassis control (PASM) – signal implausible
Control unit for chassis control (PASM) – signal implausible. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U042B00
How to read and clear U042B00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U042B00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Brake Electronics
| U015100 | Airbag control unit - missing message |
| U01B400 | Brake booster control unit - no communication |
| U040100 | Engine electronics (DME) control unit – signal implausible |
| U040200 | Transmission control unit, signal implausible |
| U041900 | Power steering control unit – signal implausible |
| U042800 | Steering-angle sensor, signal implausible |
| U043100 | Data bus - fault value received |
| U043300 | Data bus - message implausible |
| U043500 | Data bus - missing message |
| U043E00 | Invalid Data Received From Vacuum Sensor "A" |
| U043F00 | Invalid Data Received From Vacuum Sensor "B" |
| U045200 | Airbag control unit - signal implausible |
All 317 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.