Home › Fault codes › U014B00
U014B00 — Gateway – incorrect signal
Gateway – incorrect signal. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U014B00
How to read and clear U014B00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U014B00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Engine Control Module 1
| U013000 | Power steering control unit - no communication |
| U013200 | Control unit for chassis control (PASM) – no communication |
| U013C00 | Accelerator pedal sensor – electrical fault |
| U014000 | Front-end electronics control unit (BCM1) - missing message |
| U014100 | Front-end electronics control unit (BCM1) - no communication |
| U014600 | Gateway control unit - no communication |
| U015100 | Airbag control unit - missing message |
| U015500 | Instrument cluster control unit - missing message |
| U019900 | Driver-side door control unit - no communication |
| U019B00 | High-voltage charger (OBC) control unit – missing message |
| U01B400 | Brake booster control unit - no communication |
| U01BA00 | Solenoid (parking lock) – electrical fault |
All 274 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.