Home › Fault codes › U013200

U013200 — Control unit for chassis control (PASM) – no communication

Control unit for chassis control (PASM) – no communication. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set U013200

Porsche Taycan

Engine Control Module 1Gateway

Porsche 911 (992)

Engine Control Module 1Gateway

Porsche Panamera (971, 2017–2023)

Engine Control Module 1Gateway

Porsche Panamera (972, 2024–)

Engine Control Module 1Gateway

Porsche Cayenne (9YA)

Engine Control Module 1Gateway

How to read and clear U013200

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and U013200 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Engine Control Module 1

U010300Selector support - no communication
U011000High-voltage power electronics control unit - no communication
U011200High-voltage battery control unit – no communication
U011600Thermal management control unit - missing message
U012900Brake electronics (PSM) control unit - no communication
U013000Power steering control unit - no communication
U013C00Accelerator pedal sensor – electrical fault
U014000Front-end electronics control unit (BCM1) - missing message
U014100Front-end electronics control unit (BCM1) - no communication
U014600Gateway control unit - no communication
U014B00Gateway – incorrect signal
U015100Airbag control unit - missing message

All 274 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.