Home › Fault codes › P093000
P093000 — Gear Shift Lock Solenoid Control Circuit, Low
Gear Shift Lock Solenoid Control Circuit, Low. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set P093000
How to read and clear P093000
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and P093000 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Gear Shift Control Module
| P060500 | Control unit - function restriction |
| P060B00 | Control unit – internal error |
| P060C00 | Function restriction |
| P091500 | Gear Shift Position Circuit Range/Performance |
| P091900 | Selector support - fault |
| P092800 | Gear Shift Lock Solenoid Control Circuit/Open |
| P093100 | Gear Shift Lock Solenoid Control Circuit, High |
| P10E900 | Indicator light for parking lock, Implausible signal |
| P10EA00 | Indicator light for parking lock, Electrical error |
| P10EB00 | Indicator light for parking lock, Short circuit to B+ |
| P17E600 | Selector lever position sensor, Implausible signal |
| P17E700 | Selector lever position sensor, Faulty |
All 46 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.