Home › Fault codes › C110CF0
C110CF0 — Head-up display light element, LED chain failed
Head-up display light element, LED chain failed. The Taycan, Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C110CF0
How to read and clear C110CF0
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C110CF0 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Head-Up Display
| B200043 | Control unit – function restriction |
| B200046 | Control unit – function restriction |
| B200049 | Control unit – function restriction |
| B2000F4 | Function restriction |
| B2000F5 | Steuergerät defekt, Schrittmotor defekt |
| B200100 | Control unit – wrong software version |
| U101100 | Supply voltage – too low |
| U101200 | Supply voltage – too high |
| U110400 | Expanded bus operation active |
| U111000 | Function restriction due to missing message |
| U111100 | Operating and display log - missing message |
| U112100 | Data bus - missing message |
All 22 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.