Home › Fault codes › B2000F5

B2000F5 — Steuergerät defekt, Schrittmotor defekt

Steuergerät defekt, Schrittmotor defekt. The Taycan report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set B2000F5

Porsche Taycan

Head-Up Display

How to read and clear B2000F5

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and B2000F5 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Head-Up Display

B200009Ctrl. module faulty
B200041Ctrl. module faulty
B200043Control unit – function restriction
B200046Control unit – function restriction
B200049Control unit – function restriction
B2000F4Function restriction
B200100Control unit – wrong software version
C110CF0Head-up display light element, LED chain failed
U101100Supply voltage – too low
U101200Supply voltage – too high
U110400Expanded bus operation active
U111000Function restriction due to missing message

All 22 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.