Home › Fault codes › C10D3FB
C10D3FB — Level Control System, Implausible increase
Level Control System, Implausible increase. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C10D3FB
How to read and clear C10D3FB
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C10D3FB shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Chassis Control
| C10CDF4 | Vehicle level sensor - mutual short circuit, rear right |
| C10CDF5 | Vehicle level sensor – rebound stop detected |
| C10D001 | Accumulator valve sensor - electrical fault |
| C10D012 | Accumulator valve for leveling system - short circuit to B+ |
| C10D353 | System restriction |
| C10D3FA | Level Control System, Implausible reduction |
| C10EE00 | Rolling test mode - fault |
| C113E00 | Software error detected |
| C113FF0 | Operation of inclination display, No system availability |
| C113FF2 | Operation of inclination display, Improper access, adaptation data |
| C113FF3 | Operation of inclination display, Error during signal data processing |
| C113FF4 | Operation of inclination display, Error in inertial sensor sys. |
All 407 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.