Home › Fault codes › C10CDF5
C10CDF5 — Vehicle level sensor – rebound stop detected
Vehicle level sensor – rebound stop detected. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C10CDF5
How to read and clear C10CDF5
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C10CDF5 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Chassis Control
| C10C500 | Basic setting (deflected), not performed |
| C10C800 | Function deactivation active |
| C10CDF1 | Vehicle level sensor - mutual short circuit, front left |
| C10CDF2 | Vehicle level sensor - mutual short circuit, front right |
| C10CDF3 | Vehicle level sensor - mutual short circuit, rear left |
| C10CDF4 | Vehicle level sensor - mutual short circuit, rear right |
| C10D001 | Accumulator valve sensor - electrical fault |
| C10D012 | Accumulator valve for leveling system - short circuit to B+ |
| C10D353 | System restriction |
| C10D3FA | Level Control System, Implausible reduction |
| C10D3FB | Level Control System, Implausible increase |
| C10EE00 | Rolling test mode - fault |
All 407 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.