Home › Fault codes › C113FF0

C113FF0 — Operation of inclination display, No system availability

Operation of inclination display, No system availability. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set C113FF0

Porsche Taycan

Porsche 911 (992)

Porsche Panamera (971, 2017–2023)

Porsche Panamera (972, 2024–)

Porsche Cayenne (9YA)

How to read and clear C113FF0

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and C113FF0 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Chassis Control

C10D012Accumulator valve for leveling system - short circuit to B+
C10D353System restriction
C10D3FALevel Control System, Implausible reduction
C10D3FBLevel Control System, Implausible increase
C10EE00Rolling test mode - fault
C113E00Software error detected
C113FF2Operation of inclination display, Improper access, adaptation data
C113FF3Operation of inclination display, Error during signal data processing
C113FF4Operation of inclination display, Error in inertial sensor sys.
C114707Pneumatic spring / air line front left, mechanical malfunction
C114807Pneumatic spring / air line front right, mechanical malfunction
C114907Pneumatic spring / air line rear left, mechanical malfunction

All 407 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.