Home › Fault codes › U174000
U174000 — Control unit for chassis control, (PASM), fault value received
Control unit for chassis control, (PASM), fault value received. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U174000
How to read and clear U174000
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U174000 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Brake Electronics
| U140500 | Terminal 15 signal line – signal implausible |
| U141A00 | Function restriction, due to unsuccessful writing process |
| U141C00 | Voltage supply terminal 30 for electronics, Open circuit |
| U146D00 | Electromechanical brake booster, implausible signal |
| U14D400 | Brake electronics, missing message from rear-end electronics |
| U14DB00 | Brake electronics – missing message from thermal management |
| U17B800 | Electronic central electrical system, implausible signal |
| U300100 | Control unit – run-on fault |
All 317 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.