Home › Fault codes › U062F00

U062F00 — Coolant pump (P8, P3), no communication

Coolant pump (P8, P3), no communication. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set U062F00

Porsche Taycan

Porsche 911 (992)

Porsche Panamera (971, 2017–2023)

Porsche Panamera (972, 2024–)

Porsche Cayenne (9YA)

How to read and clear U062F00

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and U062F00 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Thermal Management

U062800Refrigerant circuit sensor on low pressure side (PT2) – no communication
U062A00Refrigerant circuit shut-off valve (EAV2) – no communication
U062B00Refrigerant circuit shut-off valve (EAV3) – no communication
U062C00Lost Communication With A/C Refrigerant Distribution Valve, Actuator “C”
U062D00Refrigerant circuit shut-off valve (EAV5) – no communication
U062E00Expansion valve for evaporator, low-temperature circuit (EXV2) – no communication
U063200Right radiator fan (RF1) – no communication
U063300Left radiator fan (RF3) – no communication
U063D00Additional coolant pump (P1) – no communication
U103000LIN bus 1 – electrical fault
U103C00Electric air-conditioning compressor (V470), – signal implausible
U105400Central computer control unit - missing message

All 636 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.