Home › Fault codes › U033A00
U033A00 — Software Incompatibility With Hybrid/EV, Battery Interface Control Module "A"
Software Incompatibility With Hybrid/EV, Battery Interface Control Module "A". The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U033A00
How to read and clear U033A00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U033A00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Battery Energy Control Module
| P29FF00 | Thermal outlier detected |
| P2B2800 | Additional coolant pump in low-temperature circuit (P2) – open circuit |
| P31C500 | Reduced performance due to excessive coolant temperature |
| U002800 | Hybrid CAN bus – faulty |
| U002900 | Hybrid CAN bus - no communication |
| U033700 | Software Incompatibility with Battery Charger Control Module |
| U110000 | Component protection – not taught |
| U110100 | Component protection active |
| U110300 | Production mode active |
| U110E00 | Coding |
| U111400 | Component protection – authentication failed (GFA) |
| U112100 | Data bus - missing message |
All 198 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.