Home › Fault codes › U031C00
U031C00 — Coding
Coding. The Panamera (971) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set U031C00
How to read and clear U031C00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and U031C00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the EBKV (Bremskraftverstaerker)
| P25C700 | Brake booster temperature sensor - short circuit to B+ |
| U003700 | Vehicle Communication Bus B |
| U008000 | FlexRay data bus - synchronization |
| U010000 | Engine electronics (DME) control unit – no communication |
| U012900 | Brake electronics (PSM) control unit - no communication |
| U014100 | Front-end electronics control unit (BCM1) - no communication |
| U040100 | Engine electronics (DME) control unit – signal implausible |
| U041800 | Control unit for brake electronics (PSM) – signal implausible |
| U043100 | Data bus - fault value received |
| U101100 | Supply voltage – too low |
| U101200 | Supply voltage – too high |
| U101400 | Coding |
All 70 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.