Home › Fault codes › P25C700
P25C700 — Brake booster temperature sensor - short circuit to B+
Brake booster temperature sensor - short circuit to B+. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set P25C700
How to read and clear P25C700
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and P25C700 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Brake Booster
| P05E000 | Brake pedal travel sensor - 1/2 agreement |
| P05FF00 | Brake pressure sensor / brake pedal travel sensor - deviation |
| P060700 | Ctrl. module faulty |
| P138600 | Function restriction |
| P151A00 | Control module, incorrect code |
| P25C600 | Brake booster temperature sensor - short circuit to ground |
| U003700 | Vehicle Communication Bus B |
| U010000 | Engine electronics (DME) control unit – no communication |
| U012900 | Brake electronics (PSM) control unit - no communication |
| U040100 | Engine electronics (DME) control unit – signal implausible |
| U041800 | Control unit for brake electronics (PSM) – signal implausible |
| U101100 | Supply voltage – too low |
All 55 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.