Home › Fault codes › U016600

U016600 — Auxiliary heater control unit - no communication

Auxiliary heater control unit - no communication. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set U016600

Porsche Taycan

Air ConditioningGateway

Porsche 911 (992)

Engine Control Module 1Gateway

Porsche Panamera (971, 2017–2023)

Air ConditioningEngine Control Module 1Gateway

Porsche Panamera (972, 2024–)

Air ConditioningEngine Control Module 1Gateway

Porsche Cayenne (9YA)

Air ConditioningEngine Control Module 1Gateway

How to read and clear U016600

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and U016600 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Air Conditioning

U011200High-voltage battery control unit – no communication
U011600Thermal management control unit - missing message
U012900Brake electronics (PSM) control unit - no communication
U014200Rear-end electronics control unit (BCM2) - missing message
U015100Airbag control unit - missing message
U015500Instrument cluster control unit - missing message
U016B00Electric air-conditioning compressor (V470), no communication
U019900Driver-side door control unit - no communication
U020000Door control unit, passengerʼs side - no communication
U020100Control unit for door on rear driver’s side - no communication
U020200Control unit for door on rear passenger’s side - no communication
U020700Control unit for front panoramic roof - no communication

All 418 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.