Home › Fault codes › P1CC400
P1CC400 — Control unit - function restriction
Control unit - function restriction. The Taycan, 911 (992), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set P1CC400
How to read and clear P1CC400
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and P1CC400 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the DC/DC Converter
| P0E9900 | High-voltage voltage converter, voltage sensor, below minimum |
| P0E9D00 | DC/DC converter current sensor 2 - short circuit to ground |
| P0E9E00 | DC/DC converter, current sensor 2 - short circuit to B+ |
| P0EA300 | Control unit – function restriction |
| P178E00 | Compressor for level control, Temperature too high |
| P1B3D00 | Control unit – Function limitation |
| P1D7E00 | Terminal 30 – defective |
| P1D8100 | Internal voltage sensor 1 – signal implausible |
| P1D8200 | Internal voltage sensor 1 – signal implausible |
| P1D8300 | Internal voltage sensor 1 – signal implausible |
| P1D8400 | Internal voltage sensor 1 – signal implausible |
| P1DF700 | Control unit – Function limitation |
All 200 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.