Home › Fault codes › P10DF00
P10DF00 — A/C pressure/temperature sensor 5, Incorrect component installed
A/C pressure/temperature sensor 5, Incorrect component installed. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set P10DF00
How to read and clear P10DF00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and P10DF00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Thermal Management
| P10D500 | Expansion valve for evaporator, passenger compartment (EXV3) – part number implausible |
| P10D600 | Refrigerant cut-off valve 1, Incorrect component installed |
| P10DB00 | Refrigerant circuit sensor on high pressure side (PT1) – part number implausible |
| P10DC00 | Refrigerant circuit sensor on low pressure side (PT2) – part number implausible |
| P10DD00 | Refrigerant circuit sensor on low pressure side (PT3) – part number implausible |
| P10DE00 | A/C pressure/temperature sensor 4, Incorrect component installed |
| P10E400 | Coolant fan control module, No signal |
| P10E500 | Coolant fan control module 2, No signal |
| P10E600 | Drain and fill refrigerant circuit function – active |
| P10E700 | Clean refrigerant circuit function – active |
| P10E800 | Bleed cooling systems function – active |
| P139B00 | Coolant level sensor (LS2) – coolant level too low |
All 636 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.