Home › Fault codes › P0EED00

P0EED00 — High-voltage system – discharging fault

High-voltage system – discharging fault. The Taycan report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set P0EED00

Porsche Taycan

How to read and clear P0EED00

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and P0EED00 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Drive Motor Control Module

P0E8D00Inverter, temperature sensor 2 – signal implausible
P0E8E00Inverter - voltage sensor 2, short-circuit to ground
P0E8F00Inverter - voltage sensor 2, short circuit to plus
P0E9C00DC/DC converter, current sensor 2 – signal implausible
P0E9D00DC/DC converter current sensor 2 - short circuit to ground
P0E9E00DC/DC converter, current sensor 2 - short circuit to B+
P151B00Engine electronics (DME) control unit – voltage at terminal 15 on ignition off
P160900Crash switch-off was triggered
P164700Engine electronics (DME) control unit – coding defective
P171900Rotor position sensor – position implausible
P186100Engine electronics (DME) control unit – signal implausible
P215C00Speed sensor, transmission output – signal implausible

All 143 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.