Home › Fault codes › P0ABA00
P0ABA00 — Hybrid/high-voltage battery total voltage 1 – limit value violated
Hybrid/high-voltage battery total voltage 1 – limit value violated. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set P0ABA00
How to read and clear P0ABA00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and P0ABA00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Battery Energy Control Module
| P0A9E00 | Temperature sensor 1 for hybrid/high-voltage battery - short circuit to B+ |
| P0AA100 | Hybrid/EV Battery Positive Contactor Circuit, Stuck Closed |
| P0AA200 | Hybrid/EV Battery Positive Contactor Circuit, Stuck Open |
| P0AA400 | Hybrid/EV Battery Negative Contactor Circuit Stuck Closed |
| P0AA500 | Hybrid/EV Battery Negative Contactor Circuit Stuck Open |
| P0AA600 | Hybrid/EV Battery Voltage System Isolation Fault |
| P0ABB00 | Hybrid/EV Battery Pack Voltage Sense "A" Circuit, Range/Performance |
| P0AC000 | Hybrid/EV Battery Pack Current Sensor "A" Circuit, Range/Performance |
| P0AC100 | Hybrid/EV Battery Pack Current Sensor "A", Circuit Low |
| P0AC200 | Hybrid/EV Battery Pack Current Sensor "A", Circuit High |
| P0AD900 | Hybrid/EV Battery Positive Contactor Control Circuit/Open |
| P0ADB00 | Activation of hybrid/high-voltage battery positive contact – short circuit to ground |
All 198 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.