Home › Fault codes › P070200
P070200 — Transm.Contr.System, Electrical
Transm.Contr.System, Electrical. The Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set P070200
How to read and clear P070200
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and P070200 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Torque Converter (Transmission)
| P061B00 | Internal Control Module Torque Calculation, Performance |
| P062F00 | Function restriction |
| P063400 | Control unit - temperature switch-off |
| P064200 | Sensor voltage 1 - short circuit to ground |
| P064300 | Sensor voltage 1 - short circuit to B+ |
| P066700 | Busbar PLUS rear axle, temperature sensor - signal implausible |
| P071100 | (Transmission oil) temperature sensor – implausible signal |
| P072100 | Speed sensor, transmission output – signal implausible |
| P077C00 | Speed sensor, transmission output – short circuit to ground |
| P077D00 | Speed sensor, transmission output - short circuit to B+ |
| P078000 | Shift monitoring |
| P07A500 | Dog clutch – does not separate |
All 89 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.