Home › Fault codes › P061B00
P061B00 — Internal Control Module Torque Calculation, Performance
Internal Control Module Torque Calculation, Performance. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set P061B00
How to read and clear P061B00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and P061B00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Drive Motor Control Module
| P060600 | Control unit defective |
| P060700 | Ctrl. module faulty |
| P060A00 | Internal processor monitoring - malfunction |
| P060B00 | Control unit – internal error |
| P060C00 | Function restriction |
| P061A00 | Internal Control Module Torque Performance |
| P071000 | Temperature sensor (transmission oil) - electrical fault |
| P071100 | (Transmission oil) temperature sensor – implausible signal |
| P072000 | Speed sensor, transmission output – electrical fault |
| P072100 | Speed sensor, transmission output – signal implausible |
| P072200 | Speed sensor, transmission output - no signal |
| P072300 | Transmission output speed sensor, misfire |
All 143 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.