Home › Fault codes › C130F04
C130F04 — Wheel acceleration sensor, rear left - faulty
Wheel acceleration sensor, rear left - faulty. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C130F04
How to read and clear C130F04
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C130F04 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Chassis Control
| C130D04 | Wheel acceleration sensor, front left - faulty |
| C130D31 | Wheel acceleration sensor, front left - no signal |
| C130E01 | Wheel acceleration sensor, front right - electrical fault |
| C130E04 | Wheel acceleration sensor, front right - faulty |
| C130E31 | Wheel acceleration sensor, front right - no signal |
| C130F01 | Wheel acceleration sensor, rear left - electrical fault |
| C130F31 | Wheel acceleration sensor, rear left - no signal |
| C131001 | Wheel acceleration sensor, rear right - electrical fault |
| C131004 | Wheel acceleration sensor, rear right - faulty |
| C131031 | Wheel acceleration sensor, rear right - no signal |
| C1346F0 | Torque distribution, implausible |
| C1347F0 | Wheel angle, Invalid |
All 407 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.