Home › Fault codes › C130E04

C130E04 — Wheel acceleration sensor, front right - faulty

Wheel acceleration sensor, front right - faulty. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set C130E04

Porsche Taycan

Chassis Control

Porsche 911 (992)

Chassis Control

Porsche Panamera (971, 2017–2023)

Chassis Control

Porsche Panamera (972, 2024–)

Chassis Control

Porsche Cayenne (9YA)

Chassis Control

How to read and clear C130E04

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and C130E04 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Chassis Control

C130C31Rear right body acceleration sensor, no signal
C130C4ARear right wheel acceleration sensor, suspected faulty installation
C130D01Wheel acceleration sensor, front left - electrical fault
C130D04Wheel acceleration sensor, front left - faulty
C130D31Wheel acceleration sensor, front left - no signal
C130E01Wheel acceleration sensor, front right - electrical fault
C130E31Wheel acceleration sensor, front right - no signal
C130F01Wheel acceleration sensor, rear left - electrical fault
C130F04Wheel acceleration sensor, rear left - faulty
C130F31Wheel acceleration sensor, rear left - no signal
C131001Wheel acceleration sensor, rear right - electrical fault
C131004Wheel acceleration sensor, rear right - faulty

All 407 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.