Home › Fault codes › C1296F0
C1296F0 — Sway Stabilization Control Module, Low temperature
Sway Stabilization Control Module, Low temperature. The Taycan, Panamera (971) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C1296F0
How to read and clear C1296F0
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C1296F0 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Roll Control System
| C10A700 | Rolling test mode active |
| C10EE00 | Rolling test mode - fault |
| C124E00 | 48V-System |
| C126E00 | Functional limitation due to battery open circuit |
| C129600 | Sway Stabilization Control Module |
| C12964B | Sway Stabilization Control Module, excessive temperature |
| C1296F1 | Sway Stabilization Control Module, Incompatible version |
| C1296F5 | Sway stabilization control module, Pneumatic suspension shut-off |
| C129700 | Function limitation due to malfunction in sway control module |
| C129800 | Sway stabilization actuator |
| C1298F0 | Sway stabilization actuator, Incompatible version |
| C1298F1 | Sway stabilization actuator, Regulation not possible |
All 81 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.