Home › Fault codes › C129600
C129600 — Sway Stabilization Control Module
Sway Stabilization Control Module. The Taycan, Panamera (971) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C129600
How to read and clear C129600
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C129600 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Roll Control System
| C054500 | VIN Not Programmed or Incompatible - BSCM |
| C102A00 | System function test |
| C10A700 | Rolling test mode active |
| C10EE00 | Rolling test mode - fault |
| C124E00 | 48V-System |
| C126E00 | Functional limitation due to battery open circuit |
| C12964B | Sway Stabilization Control Module, excessive temperature |
| C1296F0 | Sway Stabilization Control Module, Low temperature |
| C1296F1 | Sway Stabilization Control Module, Incompatible version |
| C1296F5 | Sway stabilization control module, Pneumatic suspension shut-off |
| C129700 | Function limitation due to malfunction in sway control module |
| C129800 | Sway stabilization actuator |
All 81 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.