Home › Fault codes › C11D1F0
C11D1F0 — Rear axle steering, Center position fixed
Rear axle steering, Center position fixed. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C11D1F0
How to read and clear C11D1F0
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C11D1F0 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Rear Axle Steering
| C10AE01 | Electromechanical power steering motor, Electrical error |
| C10AE13 | Electromechanical power steering motor, Open circuit |
| C10C929 | Steering angle value, Implausible signal |
| C10EE00 | Rolling test mode - fault |
| C11D192 | Rear axle steering – limited steering function |
| C11D196 | Rear axle steering – internal fault |
| C11D1F1 | Rear axle steering, Pneumatic suspension shut-off |
| C11D1F2 | Rear axle steering switch-on condition not met |
| C11D1F3 | Rear axle steering, control stopped by ESP |
| C11D254 | Ctrl. module for rear-wheel drive, No basic setting |
| C11D2F0 | Ctrl. module for rear-wheel drive, Calculated vehicle speed implausible |
| C11DE00 | Steering rack position sensor |
All 65 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.