Home › Fault codes › C1198F3
C1198F3 — Dipped beam headlight - voltage too low
Dipped beam headlight - voltage too low. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C1198F3
How to read and clear C1198F3
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C1198F3 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Light Control Left
| C119813 | Dipped beam – open circuit |
| C119829 | Dipped beam headlight - signal implausible |
| C119898 | Dipped beam headlight - temperature too high |
| C1198F0 | Dipped beam headlight, coding resistance - electrical fault |
| C1198F1 | Dipped beam headlight, temperature sensor - electrical fault |
| C1198F2 | Dipped beam headlight - voltage too high |
| C1198F6 | Dipped beam headlight, function restriction due to overtemperature |
| C1198FA | Dipped beam – short circuit |
| C1198FB | Low beam, below normal temperature |
| C1198FD | Low beam, excessive temp. |
| C119901 | High beam headlight - electrical fault |
| C119913 | High beam – open circuit |
All 223 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.