Home › Fault codes › C119913
C119913 — High beam – open circuit
High beam – open circuit. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C119913
How to read and clear C119913
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C119913 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Light Control Left
| C1198F3 | Dipped beam headlight - voltage too low |
| C1198F6 | Dipped beam headlight, function restriction due to overtemperature |
| C1198FA | Dipped beam – short circuit |
| C1198FB | Low beam, below normal temperature |
| C1198FD | Low beam, excessive temp. |
| C119901 | High beam headlight - electrical fault |
| C119929 | High beam headlight - signal implausible |
| C119998 | High beam headlight - temperature too high |
| C1199F0 | High beam headlight, coding resistance - electrical fault |
| C1199F1 | High beam headlight, temperature sensor - electrical fault |
| C1199F2 | High beam headlight - voltage too high |
| C1199F3 | High beam headlight - voltage too low |
All 223 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.