Home › Fault codes › C112100

C112100 — Tires 04, Tire pressure warning - too low

Tires 04, Tire pressure warning - too low. The Panamera (971) report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set C112100

Porsche Panamera (971, 2017–2023)

How to read and clear C112100

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and C112100 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the RDK (Reifendruckkontrolle)

C111B00Tires 01, Tire pressure warning - too low
C111C00Tires 01, Tire pressure warning - flat tire
C111D00Tires 02, Tire pressure warning - too low
C111E00Tires 02, Tire pressure warning - flat tire
C111F00Tires 03, Tire pressure warning - too low
C112000Tires 03, Tire pressure warning - flat tire
C112200Tires 04, Tire pressure warning - flat tire
C112B00Adaptation not possible, Too many tire pressure sensors on vehicle
C112C00Adaptation/part monitoring not possible, Tire pressure sensor defective/no signal
C1146F4Tire pressure monitoring display, Basic setting not successful
C11D516Tire pressure sensor, Voltage too low
C11D5F0Sensor für Reifendruck, Funktionseinschränkung durch Übertemperatur

All 65 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.