Home › Fault codes › C111C00
C111C00 — Tires 01, Tire pressure warning - flat tire
Tires 01, Tire pressure warning - flat tire. The Panamera (971) report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set C111C00
How to read and clear C111C00
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and C111C00 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the RDK (Reifendruckkontrolle)
| C106300 | Reset right rear, Tire pressure warning - too low |
| C10DC54 | Tire Pressure Monitoring, No basic setting |
| C10DCF0 | Received target pressure specification from HCP1 implausible |
| C111A04 | Tire pressure sensor (one or more), Faulty |
| C111A31 | Tire pressure sensor (one or more), No signal |
| C111B00 | Tires 01, Tire pressure warning - too low |
| C111D00 | Tires 02, Tire pressure warning - too low |
| C111E00 | Tires 02, Tire pressure warning - flat tire |
| C111F00 | Tires 03, Tire pressure warning - too low |
| C112000 | Tires 03, Tire pressure warning - flat tire |
| C112100 | Tires 04, Tire pressure warning - too low |
| C112200 | Tires 04, Tire pressure warning - flat tire |
All 65 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.