Home › Fault codes › B220500
B220500 — Touch controller - timeout
Touch controller - timeout. The Taycan, Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B220500
How to read and clear B220500
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B220500 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Rear Operating Unit
| B220200 | Graphics unit faulty |
| B220210 | Graphics unit faulty |
| B220300 | Graphics unit faulty |
| B220310 | Touch controller - signal implausible |
| B220400 | Touch controller - malfunction |
| B220410 | Touch controller - reset |
| B220510 | Touch controller - restart after fault |
| C10A700 | Rolling test mode active |
| C10EE00 | Rolling test mode - fault |
| C114C00 | Calibration |
| P061000 | Control unit - variant coding invalid |
| U001000 | Comfort CAN bus – defective |
All 43 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.