Home › Fault codes › B201300

B201300 — Coding

Coding. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.

Which models and control units set B201300

Porsche Taycan

Rear View CameraRear Axle SteeringSteering Assist

Porsche 911 (992)

RueckfahrkameraSteering Assist

Porsche Panamera (971, 2017–2023)

RueckfahrkameraRear Axle SteeringSteering Assist

Porsche Panamera (972, 2024–)

RueckfahrkameraRear Axle SteeringSteering Assist

Porsche Cayenne (9YA)

RueckfahrkameraRear Axle SteeringSteering Assist

How to read and clear B201300

  1. Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
  2. Open STEUER14, pick your car and run a fault scan: every control unit is read, and B201300 shows with its status, its full description and the freeze frame when the unit stores one.
  3. Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.

More about fault memory in the manual →

Download STEUER14 — free fault reading

Other codes of the Rear View Camera

B200045Control unit – function restriction
B200046Control unit – function restriction
B2000F1Control unit – function restriction
B200500Coding
B201000Calibration
B201200Coding
C110400Reversing camera, malfunction
U101100Supply voltage – too low
U101200Supply voltage – too high
U101300Coding
U112100Data bus - missing message
U112200Data bus - implausible message

All 74 codes of this control unit →

Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.