Home › Fault codes › B1C6011
B1C6011 — Supply voltage to Hall sensors 2, convertible top – short circuit to ground
Supply voltage to Hall sensors 2, convertible top – short circuit to ground. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B1C6011
How to read and clear B1C6011
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B1C6011 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Aerodynamics Control Unit
| B1C4D14 | Convertible top angle sensor - short circuit to ground or open circuit |
| B1C5112 | Microswitch, roof latch in holder position – short circuit to B+ |
| B1C5129 | Microswitch, roof latch in holder position – implausible signal |
| B1C5311 | Temperature sensor, front spoiler – short circuit to ground |
| B1C5312 | Temperature sensor, front spoiler – short circuit to B+ |
| B1C5329 | Temperature sensor, front spoiler – implausible signal |
| B1C6012 | Supply voltage to Hall sensors 2, convertible top – short circuit to B+ |
| B1C6013 | Supply voltage Hall sensors 2, convertible top – open circuit |
| B1C66F0 | Front spoiler, speed position – pressure too low |
| B1C66F1 | Front spoiler, speed position – pressure too high |
| B1C67F0 | Front spoiler, performance position – pressure too low |
| B1C67F1 | Front spoiler, performance position – pressure too high |
All 305 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.