Home › Fault codes › B1C0BF2
B1C0BF2 — Convertible top – blockage when opening
Convertible top – blockage when opening. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B1C0BF2
How to read and clear B1C0BF2
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B1C0BF2 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Aerodynamics Control Unit
| B199E12 | Right backrest release motor - short circuit to B+ |
| B199E13 | Right backrest release motor - open circuit |
| B199E19 | Right backrest release motor, current too high |
| B199FF0 | Backrest release, Anti-play protection active |
| B1C0B54 | Convertible top not taught |
| B1C0BF1 | Convertible top not in end position while driving |
| B1C0BF3 | Convertible top – blockage when closing |
| B1C0BF5 | Convertible top – timeout while opening |
| B1C0BF6 | Convertible top – timeout while closing |
| B1C0BF7 | Convertible top closed position – implausible |
| B1C0BF8 | Convertible top open position implausible |
| B1C0BF9 | Convertible top – obstacle detected during activation |
All 305 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.