Home › Fault codes › B124613
B124613 — Rear side flap motor – open circuit
Rear side flap motor – open circuit. The Taycan, 911 (992), Panamera (971), Panamera (972) and Cayenne report this code; below is which control unit sets it on each model and how to read and clear it.
Which models and control units set B124613
How to read and clear B124613
- Plug a standard ENET (Ethernet-to-OBD) cable into your Porsche's OBD port and your Mac or Windows PC.
- Open STEUER14, pick your car and run a fault scan: every control unit is read, and B124613 shows with its status, its full description and the freeze frame when the unit stores one.
- Fix the cause first, then clear the fault memory and scan again to check it stays away. Reading and clearing fault codes is free on every control unit.
More about fault memory in the manual →
Download STEUER14 — free fault readingOther codes of the Aerodynamics Control Unit
| B119911 | Roof lock motor – short circuit to ground |
| B119912 | Roof lock motor – short circuit to B+ |
| B119913 | Roof lock motor – open circuit |
| B119919 | Roof lock motor – current too high |
| B124611 | Rear side flap motor – short circuit to ground |
| B124612 | Rear side flap motor – short circuit to B+ |
| B124619 | Rear side flap motor – current too high |
| B147004 | Control unit – function restriction |
| B147016 | Supply voltage – too low |
| B147017 | Supply voltage – too high |
| B147054 | Calibration |
| B1470F3 | Temperature - above limit value |
All 305 codes of this control unit →
Fault names come from the manufacturer's diagnostic data. STEUER14 is independent and not affiliated with Porsche AG. A code tells you what a control unit detected, not always which part failed — check wiring, supply voltage and related codes before replacing parts. STEUER14 shows each fault's full description, status and freeze frame on the car.